The electromagnetic vibration tester simulates the vibration environment under laboratory conditions and tests the impact strength and reliability in various vibration test applications. Models such as sinusoidal, random, resonant search and dwell, typical shock and road simulation can be simulated in the laboratory with the aid of a vibration tester system. For product quality assurance, new product development is essential.
The electromagnetic vibration testing machine is specially designed to meet long-term work, and the vibration-proof base can be installed to achieve vertical and horizontal vibration. The standard platform is fitted with the best air-pressure isolation device to minimize vibrations that propagate to the building, and in most cases does not require additional foundation.
The vibration table, power amplifier and vibration measurement control system form a complete vibration test system in accordance with relevant national and international standards (eg: MIL-STD, DIN, ISO, ASTM, IEC, ISTA, GB, GJB, JIS, BS, etc.) provides technical support for users to establish product quality inspection.
Product Features:
Strong suspension system and linear motion guidance, strong carrying capacity, good guiding performance and high stability
The center load airbag has large static stiffness, small dynamic rigidity, strong carrying capacity, and excellent performance when the amplitude changes.
High efficiency D Class power conversion, 3-Sigma peak current for opt
imum power consumption and minimal harmonic distortion
Rapid self-test diagnosis and chain protection, high safety and reliability
The airbag isolation damping device eliminates the need for a dedicated foundation for the vibration table, perfectly reproducing the vibration waveform and reducing the vibration transmission.
Provide different uses of horizontal and vertical expansion platforms
| model |
MXY-400 |
MXY-600 |
| Maximum test machine load |
40 |
60 |
| Manual frequency range |
1-200 |
1-200 |
| Automatic sweep range |
1-200 |
1-200 |
| No-load displacement amplitude |
0-5 |
0-5 |
| Excitation mode |
Electromagnetic centrifugal |
| Amplitude modulation method |
Electronic stepless amplitude modulation |
| Vibration direction |
Vertical and horizontal vibration |
| Vibration waveform |
Sine wave |
| Test mode |
FM / automatic frequency sweep |
| Time range |
0.01S-99.99H |
| Work surface size |
450x450x46 |
550x550x46 |
| Workbench size |
450x450x450 |
550x550x350 |
| Control box size |
450x330x750 |
450x330x750 |
